|
|
Energy Recovery Systems
|
With the
price of energy continually rising, conserving energy is an absolute
necessity. It is no longer economically viable for manufacturing or
processing plants to emit clean, heat-laden exhaust into the atmosphere
without first reclaiming a significant portion of that energy.
CSM is in
the forefront of waste heat recovery technology, transferring reclaimed
heat to other parts of a plant or facility, where it can be put to good
use. Our custom line of KALEX™ recuperative heat exchangers, with
their fully welded stainless steel construction and up to 5-psig design,
are considered the "gold standard" for their great efficiency
in recovering energy from clean, hot-air exhausts.
Noted for
their highly efficient heat recovery in more than 40 years' worth of industrial
applications, KALEX™ heat exchangers pre-heat the inlet VOC-laden
stream by recovering heat from the clean hot exhaust of our catalytic
oxidizers, thus helping to minimize operating costs. Other features
include compact and modular construction and low pressure drop.
|
|
|
|
|
Integrating
energy-saving heat recovery into our emission control systems is routine
for our engineering staff. Our versatile COGEN systems provide a seamless
solution to the complex challenge of engineering-in optimum emission
control, air permit compliance and energy-conserving waste heat recovery.
With the price of energy continuing to rise, your return-on-investment
(ROI) will only get better.
In fact,
using a simple skid design and a KALEX™ heat exchanger, it is not
uncommon for CSM to save hundreds of thousands of dollars per year in
wasted energy.
Your "Free Utility"
You already
pay for water, electricity, natural gas, and compressed air. Now take
advantage of a "free utility" - heat recovered from waste heat
sources. We install a glycol or other heat recovery system in your plant
and use it to recover BTUs from oxidizer exhaust and other waste heat
sources, and provide hot glycol to low-temperature uses such as boiler
feedwater pre-heating, industrial hot water, room heating, and process
heating.
Catalytically
Enhanced Energy Recovery Systems
For those
who don't necessarily need VOC treatment or control, but already have a
high-temperature exhaust stack (450 °F or higher) and would like to reap
the benefits of an energy-recovery system, check out our new catalytically
enhanced energy recovery system (CEERS). With CEERS, CSM catalysts can be
used to burn off some of the VOCs from the hot gas and provide an
additional temperature boost. At the higher temperature, more heat may be
pulled off for free and distributed throughout your plant, at no extra cost
to you.
|
|
